Introduction of Wood Pellet Production Line
We can provide different kind of complete wood pellet production line. The wood pellet production line suitable for press the different kind of wood wast, wood scrap, wood shaving and other biomass mateirals such as rice husk, corn cob, straw, plam fiber and other agricultrue waste into good quality biomass fuel pellets.
Finished Wood Pellets Feature of Wood Pellet Production Line
1.Wood pellet is new-style energy which is renewable, environmental protection ,clean and low cost.
2.Wood pellet is widely used in heating, biomass boiler, household gasification furnace, industrial boiler, hotels, restaurants, bath in industries as heat source,instead of coal in boiler burning,avoid the pollution of burning the coal ,also being used as industial fuel ,biomass power generation.
3.High density from 1.1-1.3g/cm3,easy to store and transportation ,Calorific value can be 3500-5500Kilocalorie.
4.Part of wood pellet.
Advantage of Wood Pellet Production Line
1. Wood pellet production line is an automation equipment,with automatic oil -supply device , save maintenance labor and time ,which can work 20-24 hours continuous.
2. Wood pellet production line can forming with moisture less than 8%,the largest moisture can be 15%, if the moisture from 10-15% ,the density will decrease capacity will little increase.
3. High automation, save labor, mold and gear have long life time of 1000-1200Hours.
4. Widely suitability:Usual material and rice husk, palm fiber.
Wood Pellet Production Line Process
1. Wood Pellet machine: Wood pellet machine price convert the biomass material into pellet, the length can be customed.
2. Dring process: Air flash wood dryer or drum wood dryer which can dry the material under the moisture of 8%,which is suitable for pellet forming.The dryer use hot air accompany with material and evaporated rapidly .
3. Crushing process: Wood crusher which can crushed the raw material into sawdust shape ,under 6mm , which is suitable for the dryer and pellet machine.It can crush straw,stalk,tree branches ,nutshell,wood shavings,wood waste board,leaves,palm fiber ,etc.
4. Cooling process: You can use a cooling fan or cool it by nature about half or one hour.
5. Packing and bagger: After cooling the semi-automatic quantative packing machine can pack the pellet into bag with quantative weight.